Skip to content Skip to footer

DRE Alta V8 Anesthesia Machine

The DRE Alta V8 Anesthesia Machine provides industry-leading anesthesia capabilities at an affordable price.

Type
: Anesthesia Machines

Compare
Category: Product ID: 5707

Description

The three-gas machine comes standard with advanced ventilation modes: VCV, PCV, PSV, SIMV-VC, SIMV-PC, Spontaneous, and Manual. Increase your surgical capabilities with this new, easy to use anesthesia system.

Features:

  • Complete anesthesia system with various ventilation modes: VCV, PCV, PSV, SIM-VC, SIM-PC, Spontaneous and Manual.
  • Designed for use in pediatric and adult care environments.
  • Three gas machines (O2, N2O and Air) with a six-tube flowmeter.
  • Tidal volume setting: 50 ~ 1500 mL.
  • Features a pneumatic system with hypoxic guard system, ORC, and O2 flush.
  • An active expiratory PEEP valve is built into the unit.
  • Selectatec-compatible back bar holds up to two vaporizers.
  • Integrated absorber system with heating function and bypass design is easy to assemble, autoclavable, and helps to reduce leakage.
  • The eight-inch TFT touchscreen is crisp, colorful, and easy to read.
  • Simple and intuitive user interface.
  • Built-in battery.
  • Optional — Auxiliary flowmeter with oxygen port.
  • Optional — ACGO, 3 Yokes, AGSS and Suction.

Specifications:

Measurement

  • Pressure values: Peak, Pmean, Pplat, PEEP
  • Volume/Flow values: Vti, Vte, MV, MV spot
  • Waveforms: Paw, Flow, Volume
  • Frequency, Rate Spot, I:E, O2 Percentage, Compliance, Resistance
  • Optional: EtCO2, SPO2

Dimensions

  • Machine size: 55 in H x 27 in W x 25 in D (1410 mm H × 950 mm W × 650 mm D)
  • Machine weight: Approximately 242.5 lb (110 kg)
  • Maximum bearing weight of the top cover: 66 lb (30 kg)
  • Castors: 4, diameter 4.9 in (125 mm)
  • Drawer 1: 7.8 in H x 15.4 in W x 15.6 in D (200 mm H × 392 mm W × 398 mm D)
  • Drawer 2: 7.8 in H x 15.4 in W x 15.6 in D (200 mm H × 392 mm W × 398 mm D)

Display

  • Type: Color TFT LCD (touch screen)
  • Size: 8.4 in (213 mm)
  • Resolution: 640 × 480 pixels
  • Brightness: Fixed
  • Knobs: 1, Support clockwise/ counterclockwise rotation and pressing operation
  • Buttons: 4, Alarm pause, alarm reset, standby, back to the main screen

Audio Instructions / Alarms

  • Speaker: Alarm sounds, tone: supports multi-level volume, alarm tone meet IEC60601-1-8 standards
  • Alarms: MV, Paw, Continuous Paw high, Vte, Rate, O2 Percentage, Activate standby mode, Mains failure, Battery, Gas Supply failure, Apnea, EtCO2

Interface

  • Power supply: An AC power inlet, three auxiliary output outlets
  • Monitor: A standard color VGA monitor connector,15-PIN D-sub socket
  • Equipotential: An equipotential ground terminal
  • USB: 1, standard USB connector

Power

  • Input voltage: 100-240 V
  • Input frequency: 50/60 Hz
  • Input power: <150 VA
  • System leakage current limit-do not exceed: Less than 500 u amps for the system and all systems connected to electrical outlets.
  • Resistance to the ground: Less than 0.2 Ω
  • Fuse: T10AL/250 V
  • Power Cord: 3M
  • 3 Auxiliary output supplies

Internal Battery

  • Internal battery: 1
  • Type: NiMH
  • Rated battery voltage: 12V DC
  • Battery capacity: 4200 mAh
  • Shutdown delay: Less than 1 0min (powered by new fully-charged battery after the first low-power alarm)
  • Shortest supply time: 90 min
  • Charging time: 4 h

Environmental

  • Operating temperature: 10~40 °C
  • Operating humidity: 5~95%, non-condensing
  • Operating barometric pressures: 70~106 KPa
  • Storage temperature: -20~55 °C
  • Storage humidity: 10 ~ 95%, non-condensing
  • Storage barometric Pressures: 50~106 KPa

Reviews

There are no reviews yet.

Be the first to review “DRE Alta V8 Anesthesia Machine”

Your email address will not be published. Required fields are marked *

DRE Alta V8 Anesthesia Machine - EL Providers