Specifications:

Physical Display

• Height: 10.25″ (26 cm)
• Depth: 8″ (20 cm)
• Width: 11″ (28 cm)
• Weight: 12 lbs (5.5 kg) maximum
• Size: 5.8″ (16 cm) diagonal
• Type: monochrome LCD; optional color LCD
• Resolution: 320 x 240 pixels
• Number of traces: 3
• Number of seconds/trace: 3.8 at 25 mm/sec
• Sweep speed: 25 mm/sec (with erase bar)
• Information window: display non-real-time information without obstructing the display of real-time information
• Display organization: prioritized by parameter

ECG

• Leads: I, II, III, V, aVR, aVL, and a VF.
• Lead fail: identifies failed lead.
• Alarms: user-selectable upper and lower limits.
• Heart rate range: 30 to 300 bpm

Respiration

• Measurement technique: impedance variation detection.
• Respiration rate range: 0 to 200 breathes per minute.
• Alarms: user-selectable upper and lower respiration rate limits and apnea limit.

IBP

• Number of channels: 1.
• Transducer sites: arterial, pulmonary arterial venous, left arterial, intracranial and special.
• Range: -25 mmHg to 300mmHg.
• Alarms: user-selectable upper and lower limits for systolic, diastolic and mean pressures

Temperature

• Number of channels: 1.
• Range: 0°C to 45°C (32°F to 113°F).
• Resolution: ±0.1°C (0.18°F).
• Accuracy: ±0.1°C (0.18°F).
• Alarms: user-selectable upper and lower limits

NIBP

• Measurement technique: oscillometric.
• Displayed parameters: systolic, diastolic and mean pressures, pulse rate, time of last measurement.
• Measurement modes: manual, auto and start in adult ICU and OR modes; a/manual and auto in neonatal mode.
• Heart rate detection: 30 to 300 beats per minute.
• Total cycle time: 20 to 40 seconds typical.
• Automatic cycle times: 0 to 24 hours.

Pulse Oximetry

• Parameters monitored: arterial oxygen saturation (SpO2) and peripheral pulse rate (PPR).
• SpO2 range: 50 to 100%.
• PPR range: 30 to 300 beats per minute (±3 beats per minute).
• SpO2 accuracy: ±2% (70 to 100% SpO2),±3% (50 to 69% SpO2).
• PPR accuracy:±3 beats per minute

Alarms

• Categories: patient status and system status.
• Priority: 4 levels – crisis, warning, advisory, message.
• Notification: audible and visual.
• Setting: default and individual.
• Silencing: 1 minute, current alarm only.
• Pause: 5 minutes in adult ICU mode, 3 minutes in neonatal ICU mode, and 5, 15 minutes or permanent pause in OR mode.
• Volume: default 70%, 70 dB measured at 1 meter.

Controls

• Trim Knob® control.
• Five hard keys: silence alarm, graph go/stop, NBP go/stop, function and power on/off.

Electrical

• Power requirements: 90 to 264 VAC 50/60 Hz 500 mA.
• Power consumption: 40 Watts (fully loaded).
• Cooling: convection. Heat dissipation: 135Btu/br maximum