Skip to content Skip to footer

Medica EasyRA Chemistry Analyzer – LIS, ISE, PRINTER

Medica EasyRA Analyzer – LIS, ISE, PRINTER

Brand: Medica

Compare
Category: Product ID: 4560

Description

Faster Throughput

  • Increased throughput up to 240 samples/hour depending on the tests assayed.
  • Faster cycle time for inventories, pipetting and fluid handling.

Minimal Changes

  • No changes to spare parts/consumables for the end user.
  • Maintenance schedules are almost identical. Waste tubing maintenance schedule reduced from 6 to 4 months.
  • Limited changes to existing reagents. BUN, GGT and ALP parameters have been slightly modified to improve performance on all models.
  • Minimal hardware changes. No additional service training required.

Easy Tracking & Transition

  • Track different analyzer versions by serial number: Higher speed analyzers have an 11-digit serial number versus 8-digits for the current versions.
  • No changes to analyzer catalog (REF) numbers. REF 10405 (with ISE & Printer)

Benefits of moderately complex drug screening on the EasyRA analyzer

  • Fully automated enhancing efficiency
  • Positive/negative results reported, no manual visual interpretations
  • Reduce risk of transcription errors with automated data entry and bidirectional LIS communication
  • Give clinicians more control by allowing them to run individual analytes of interest
  • Single platform for drugs of abuse in urine and routine chemistries

Features:

  • Waste tubing maintenance schedule reduced from 6 to 4 months
  • Limited changes to existing reagents. BUN, GGT and ALP parameters have been slightly modified to improve performance.
  • Minimal hardware changes and no additional service training required
  • Sample cups or primary tubes in a wide range of sizes
  • Data storage of 2000 patient results; 56,000 test results, ability to archive and retrieve results

Medica EasyRA analyzer Includes Installation, Training, Validation, and One Year Manufacturer Warranty.

Technical Specifications:

  • System specifications: True random access, clinical chemistry analyzer
  • Throughput: Patient results per hour, photometric: up to 240 tests/hour*; ISE: up to 240 tests/hour*; STAT time: 8 minutes (Na+/K+/Cl-/CO2/GLU/BUN/CREA)
  • Types of analysis: Endpoint, enzymatic, rate, biochromatic, potentiometric, enzyme immunoassay (EIA), turbidimetric immunoassay (TIA)
  • Samples: 24 sample positions per sample ring for patient, calibrator, or QC samples; STAT: up to 5 user-defined positions; optional second sample ring uniquely identified by analyzer; automatic dilution: 1:2, 1:3, 1:5 and 1:10 final dilution
  • Sample volume: Photometric chemistries: 2.0–25.0 μL; programmed in 0.1 μL steps; ISE chemistries: serum: 80–90 μL; urine: 140 μL
  • Sample containers: Sample cups or primary tubes in a wide range of sizes
  • Sample identification: Position ID, barcode ID (optional), barcode types: codabar, code 39, 128, interleaved 2 of 5
  • Reagents: 24 positions for reagents; reagent cooling temperature 12º–15º C less than ambient; reagent identification: RFID (radio frequency identification) technology – automatic tracking and entry of reagent information (chemistry name, lot number, expiration date; reagent volumes; analysis volumes for reagents, samples, diluent; primary and secondary wavelengths; reaction read times; analysis type; reagent and sample blanking; linear range of assay; acceptable absorbance ranges). Reagents are ready to use. 6 open channels.
  • Reagent volumes: Reagent volume (R1)/test 120–350 μL; programmed in 1 μL steps. reagent volume (R2)/test 10–50 μL; programmed in 1 μL steps
  • Water supply: Reagent grade deionized water, diluent bottle
  • Sampling system: Probe pre-heater; single probe with RF level sensing; inner and outer probe washing
  • Cuvette material: Optical acrylic; disposable segments; 12 cuvettes per segment; 6 total segments in reaction area
  • Reaction time: 1–15 minutes
  • Reaction temperature: 37º ± 0.25º C (photometric chemistries)
  • Wavelength: 340, 405, 520, 550, 600, 660, 700; half bandwidth 10 ± 2 nm
  • Light source: xenon flash lamp, 5 year typical life
  • Photometric linearity: 0.0–2.5 Abs units for 0.6 cm pathlength (1% deviation)
  • Photometric resolution: 0.0001 Abs units at 1.0 Abs
  • Quality control: 2 levels of controls (Levey-Jennings plots for two levels)
  • Calibration curves: Single and multilevel calibration (based on analyte)
  • User interface: Edit and monitor worklists; review results; review calibration and quality control results; Levey-Jennings charts for 31 days of QC results; on-board diagnostics and individual component monitoring; graphic instructions for daily, weekly and monthly maintenance procedures
  • Power requirements: 100 VAC–240 VAC ± 10% 50–60 Hz, 4.0/2.0A
  • Size and weight: 40˝ w x 15˝ h x 26˝ d (102 cm x 38 cm x 66 cm), 88 lbs (40 kgs) without reagents
  • Ambient conditions: 15º–30º C (59º–86º F); <85% relative humidity, non-condensing atmospheric air environment
  • Computer requirements (minimum): Windows® 8**; CD/CD-RW; 1 RS-232 or USB port; touch screen monitor or SVGA color monitor, mouse and keyboard
  • Optional features: ISE Module

Drug Testing On EasyRA Analyzer – Benefits

Drug screening on the EasyRA analyzer provides certain benefits such as

  • Fully automated enhancing efficiency
  • Positive/negative results reported, no manual visual interpretations
  • Reduce risk of transcription errors with automated data entry and bidirectional LIS communication
  • Give clinicians more control by allowing them to run individual analytes of interest
  • Single platform for drugs of abuse in urine and routine chemistries

Reviews

There are no reviews yet.

Be the first to review “Medica EasyRA Chemistry Analyzer – LIS, ISE, PRINTER”

Your email address will not be published. Required fields are marked *

Medica EasyRA Chemistry Analyzer – LIS, ISE, PRINTER - EL Providers