Features:

• Simple Controls: A wide range of settings enable a constant flow during the inspiratory phase and infinite variability of I:E settings.
• Manometer: Respiratory manometer with a range of -20 to 100 cmH2 O and zero adjustment facility.
• Newton Valve: The Standard Patient Valve can be replaced with the Newton Valve for the ventilation of small patients.
• IDP Alarm: A suitable ventilator alarm and pollution control system can be attached to the ventilator, if required

Specifications:

• Weight: 6.8 lbs (3.1 kg)
• Power Source: Medical air or oxygen at 340 kPa (50 lbf/in2) – 410 kPA (60 lbf/in2)
• Tidal Volume: 10ml – 300ml (Newton Valve) 50ml – 2000ml (Standard Valve)
• Frequency: 10 – 85 (cycle/min)
• Frequency for HFPPV: 60 – 125 (cycle/min)
• Inspiratory Flow (litres per sec): 0.25 – 1.0 (independent and continuously variable)
• I:E Ratio: Continuously variable and dependent on chosen I & E settings
• Gas Consumption: Minute volume plus 0.1 litre/ cycle to power fluid logic circuit
• Minute Volume: 1.0 – 30.0 litres
• Inspiratory: Time: 0.2 – 2.0 sec. (independent and continuously variable) Flow: 0.25 – 1.0 litres/ sec (independent and continuously variable) Pressure Relief: 60cm H2O
• Expiratory: Time: 0.5 – 4.0 sec. (independent and continuously variable) Resistance: 2.5 cm H2O/litre Respiratory Manometer: Range -20 to +100cm H2O with zero adjust facility