Features:

• Complete anesthesia system with various ventilation modes: VCV, PCV, PSV, SIM-VC, SIM-PC, Spontaneous and Manual.
• Designed for use in pediatric and adult care environments.
• Three gas machines (O2, N2O and Air) with a six-tube flowmeter.
• Tidal volume setting: 50 ~ 1500 mL.
• Features a pneumatic system with hypoxic guard system, ORC, and O2 flush.
• An active expiratory PEEP valve is built into the unit.
• Selectatec-compatible back bar holds up to two vaporizers.
• Integrated absorber system with heating function and bypass design is easy to assemble, autoclavable, and helps to reduce leakage.
• The eight-inch TFT touchscreen is crisp, colorful, and easy to read.
• Simple and intuitive user interface.
• Built-in battery.
• Optional — Auxiliary flowmeter with oxygen port.
• Optional — ACGO, 3 Yokes, AGSS and Suction.

Specifications:

Measurement

• Pressure values: Peak, Pmean, Pplat, PEEP
• Volume/Flow values: Vti, Vte, MV, MV spot
• Waveforms: Paw, Flow, Volume
• Frequency, Rate Spot, I:E, O2 Percentage, Compliance, Resistance
• Optional: EtCO2, SPO2

Dimensions

• Machine size: 55 in H x 27 in W x 25 in D (1410 mm H × 950 mm W × 650 mm D)
• Machine weight: Approximately 242.5 lb (110 kg)
• Maximum bearing weight of the top cover: 66 lb (30 kg)
• Castors: 4, diameter 4.9 in (125 mm)
• Drawer 1: 7.8 in H x 15.4 in W x 15.6 in D (200 mm H × 392 mm W × 398 mm D)
• Drawer 2: 7.8 in H x 15.4 in W x 15.6 in D (200 mm H × 392 mm W × 398 mm D)

Display

• Type: Color TFT LCD (touch screen)
• Size: 8.4 in (213 mm)
• Resolution: 640 × 480 pixels
• Brightness: Fixed
• Knobs: 1, Support clockwise/ counterclockwise rotation and pressing operation
• Buttons: 4, Alarm pause, alarm reset, standby, back to the main screen

Audio Instructions / Alarms

• Speaker: Alarm sounds, tone: supports multi-level volume, alarm tone meet IEC60601-1-8 standards
• Alarms: MV, Paw, Continuous Paw high, Vte, Rate, O2 Percentage, Activate standby mode, Mains failure, Battery, Gas Supply failure, Apnea, EtCO2

Interface

• Power supply: An AC power inlet, three auxiliary output outlets
• Monitor: A standard color VGA monitor connector,15-PIN D-sub socket
• Equipotential: An equipotential ground terminal
• USB: 1, standard USB connector

Power

• Input voltage: 100-240 V
• Input frequency: 50/60 Hz
• Input power: <150 VA
• System leakage current limit-do not exceed: Less than 500 u amps for the system and all systems connected to electrical outlets.
• Resistance to the ground: Less than 0.2 Ω
• Fuse: T10AL/250 V
• Power Cord: 3M
• 3 Auxiliary output supplies

Internal Battery

• Internal battery: 1
• Type: NiMH
• Rated battery voltage: 12V DC
• Battery capacity: 4200 mAh
• Shutdown delay: Less than 1 0min (powered by new fully-charged battery after the first low-power alarm)
• Shortest supply time: 90 min
• Charging time: 4 h

Environmental

• Operating temperature: 10~40 °C
• Operating humidity: 5~95%, non-condensing
• Operating barometric pressures: 70~106 KPa
• Storage temperature: -20~55 °C
• Storage humidity: 10 ~ 95%, non-condensing
• Storage barometric Pressures: 50~106 KPa