Features:

• Small, lightweight, professional-grade AED ideal for mobile use.
• Unit automatically initiates when the carrying case is opened, allowing emergency professionals to focus on pad placement.
• Pre-connected SMART PADS III don’t have foil pouches, just peel and place.
• Patient-specific guidance with Philips SMART CPR.
• Philips Quick Shock technology minimizes CPR interruptions.
• Weighs only 3.5 pounds and is available with a wide array of carrying case options for easy transport.
• Durable AED is tested to US Military standards and can withstand demanding work conditions.
• AED performs periodic, automated self-tests to help ensure proper function.
• Bilingual configurable so that voice and text prompts can be clearly understood.
• High-resolution color LCD for easy viewing in any environment.
• Optional — Infant/Child key automatically decreases defibrillation therapy in accordance with pediatric CPR protocols.

Specifications:

Defibrillator

• 861388 text display
• 861389 ECG and text display
• Waveform: SMART Biphasic Truncated Exponential waveform parameters adjust as a function of patient impedance. Adult nominal peak current 32A (150J into a 50 ohm load): pediatric nominal peak current 19A (50J into a 50 ohm load) using optional Infant/Child Key
• Shock delivery: Via defibrillator pads placed in the anterior-anterior(Lead II) position for adults; anterior-posterior position for infants and children under 55 lbs or 8 years old
• Controls: On/Off button, shock button, option buttons. Auto-On feature, when used with the optional FR3 carry case, enables FR3 to power up when case lid is opened
• Indicators: High-resolution color LCD, beeper, voice prompts, tones and chirps, audio speaker, connector socket, ready light, shock button
• Advanced mode: Configurable using optional HeartStart Configure software

ECG Display

• Screen: LCD color display, 320 x 240 pixels. 2.8″ x 2.1″
• 1 Hz to 30 Hz (-3dB), nominal (non-diagnostic)
• Lead II using anterior-anterior adult pads placement

Physical

• Size: 2.7″ high x 5.3″ wide x 8.7″ deep
• Weight: 3 lbs 8 oz with FR3 primary battery installed

Environmental

• Sealing: Meets IEC529 class IP55 with battery installed
• Temperature: Operating/standby: 32°–122°F
• Altitude: Meets IEC 60601-1:5.3 (1013 to 572 mbar (hPa), equivalent to air pressure from 0 to 15,000 feet)
• Shock/drop Abuse tolerance: Meets MIL-STD-810F 516.5, Procedure IV (after a one-meter drop to any edge, corner, or surface in standby mode)
• Vibration: Meets MIL-STD-810F 514.5 C-17

Bluetooth 2.0

• Bluetooth 2.0 Class II Wireless Transceiver Module
• Function: Transmit retrospective event data or configuration setting wirelessly

Patient analysis system

• ECG analysis: Evaluates impedance of defibrillator pads for proper contact with patient skin, evaluates the ECG rhythm and signal quality to determine if a shock is appropriate; also detects artifact and pacemaker
• SMART CPR: Evaluates key characteristics of the presenting VF and determines the initial therapy: shock first, or CPR first quickly followed by a shock
• Sensitivity/specificity: Meets AAMI DF80 requirements and AHA recommendations for adult defibrillation
• Quick shock: Typically arms in <8 seconds from the end of the “Stop CPR” prompt

FR3 primary battery

• Type: 12 VDC, 4.7 Ah, lithium manganese dioxide | Long-life primary cells
• Typically 300 shocks or 12 hours of operating time at 77° F (25° C) when configured for monitoring after No Shock Advised (NSA) | 7.5 hours of operating time at 77° F (25° C) when configured for CPR after NSA
• Standby life: 3 years minimum when stored under standby environmental conditions (battery installed)
• Shelf life: 5 years

SMART Pads III

• Application: Disposable, multifunction defibrillation pads for adult or infant/child patients. Time-saving peel and place pads can be removed from packaging and stored in the FR3 carry case. Pads can be preconnected to FR3, which enables testing during FR3’s routine self-test.

FR3 data card

• Function: Stores a minimum of 8 hours of ECG, event, and, if configured, voice recording. Can also be used for configuring FR3

Automated and user-activated self-tests

• Automatic self-test: Tests internal circuitry, waveform delivery system, ECG acquisition, temperature, status (or readiness) of attached accessories (SMART Pads III and FR3 data card) and battery
• Automated self-test frequency: Daily, weekly, monthly, power on, and runtime during all modes of operation
• User initiated tests: Automatic self-tests plus tone, display, and button performance

FR3 training battery and training pads (optional)

• Function: Places FR3 into a scenario-based training mode and simulates shock therapy
• Type: 10.8 Volt, 4.5 Ah Li-ion battery