Features:

• A stable, highly-adjustable ESU with TFT color touchscreen panel for easy, flexible operation.
• Internet connectivity and data logging capabilities.
• Patient return electrode monitor increases patient safety by preventing electrode site burns.
• Remote power settings allow clinicians to adjust mode and power from the sterile area.
• Data logging stores the last 50 surgical cases in system memory.
• System can run self-demonstration mode to display modes and settings.
• 100 different combinations of operating modes for virtually any procedure.
• Two Vessel Sealing Modes for up to 7mm of tissue, with audio indication at completion. Alarm sounds if vessels are improperly sealed.
• Monopolar and bipolar capable with the appropriate accessories.
• Automatic tissue sensing starts and stops bipolar modes without footswitch activation.
• Audible feedback after completion of Bipolar coag reduces charring and sticking.
• Two simultaneous coagulation outputs with independent controls.
• Self-diagnostic protocols help to ensure all parts and accessories are properly functioning.
• Durable, Waterproof footswitches and pedals.
• Optional – Timeout function automatically stops the HF output in the event of an unintended activation.
• Optional – Citadel ESU mobile cart, argon beam coagulation, ultrasonic aspirator, smoke evacuator and suction irrigation module.

Specifications:

Dimensions

• Width: 16.5 in (42 cm)
• Depth: 17.7 in (45 cm)
• Height: 6.9 in (17.5 cm)
• Weight: < 16.53 lbs (7.5 kg)

Power

• Operating voltage: 180-265 V AC
• Max. Power input: 1000 VA
• Fuse: 4 A
• UPS Backup: 1.5 KVA

Monopolar Autocut

• Seven modes, 390 kHz
• Low Cut: Continuous output, 400 W at 300 Ω, CF 1.5, Low Volt
• Pure Cut: Continuous output, 400 W at 300 Ω, CF 1.5
• Blend1: Bursts at 29 kHz, 250 W at 300 Ω, CF 2
• Blend2: Bursts at 29 kHz, 200 W at 300 Ω, CF 2.6
• Endo1: Pulse output, 400 W at 300 Ω, CF 1.5 Low Pulse Intr.
• Endo2: Pulse output, 400 W at 300 Ω, CF 1.5 High Pulse Intr.
• Hydro: Continuous output, 400 W at 300 Ω, CF 1.5, Rapid

Monopolar Coag

• Seven modes: 460 kHz
• Soft: Continuous output, 300 W at 300 Ω, CF 1.5, Low Volt
• Desiccate: Repetition frequency 83 kHz, 200 W at 500 Ω, CF 5.0
• Swift: Repetition Frequency 53 kHz, 120 W at 500 Ω, CF 6.2
• Force: Repetition Frequency 29 kHz, 120 W at 500 Ω, CF 7.0
• Spray: Repetition Frequency 24 kHz, 120 W at 500 Ω, CF 8.0
• Hi-Spray: Repetition Frequency 13 kHz, 70 W at 500 Ω, CF 10.0
• Hydro: Repetition Frequency 29 kHz, 120 W at 500 Ω, CF 7.0

Saline Resection Mode

• Four modes, 440 kHz
• Low Cut: Continuous output 300 W at 100 Ω, CF 1.5, LV
• Standard Cut: Continuous output 300 W at 100 Ω, CF 1.5 HV
• Soft Coag: Continuous output 200 W at 100 Ω, CF 1.5 LV
• Force Coag: Continuous output 200 W at 100 Ω, CF 1.5 HV

Bipolar Coag

• Five modes, 440 kHz
• Micro: Continuous output, 120 W at 100 Ω, CF 1.5, Low Volt
• Standard: Continuous output, 120 W at 100 Ω, CF 1.5, Medium Volt
• Force: Continuous output, 120 W at 100 Ω, CF 1.5, High Volt
• Bip Cut: Continuous output, 120 W at 100 Ω, CF 1.5, Low Volt
• Macro Cut: Continuous output, 120 W at 100 Ω, CF 1.5, High Volt

Vessel Sealing

• Two modes, 440 kHz
• Fine seal: Low Pulse output, 5 levels, 150 W at 100 Ω, CF 1.5
• Rapid seal: High Pulse output, 5 levels, 150 W at 100 Ω, CF 1.5

Feedback System

• 3 Microprocessor Controlled 6SENSE Technology with sampling rate about 4000 sense/second.
• Maximum output power deviation < 15% or 5 watts, whichever is greater at any setting with PER-98

Leakage Currents

• RF leakage current: Monopolar < 150 mA rms, Bipolar < 60 mA rms
• Low Frequency leakage currents: Normal polarity – intact ground < 10 μA, Normal polarity – ground open < 50 μA